{"id":942,"date":"2025-05-10T15:32:47","date_gmt":"2025-05-10T19:32:47","guid":{"rendered":"http:\/\/www.jckhvac.com\/?p=942"},"modified":"2025-05-28T01:51:00","modified_gmt":"2025-05-28T05:51:00","slug":"bryant-furnace-codes","status":"publish","type":"post","link":"http:\/\/www.jckhvac.com\/zh\/bryant-furnace-codes\/","title":{"rendered":"bryant furnace codes"},"content":{"rendered":"

bryant furnace codes<\/h2>\n\n\n\n

Each of the following status codes is a two digit number with the first digit determined by number of flashes of the yellow led and the second digit determined by number of flashes of the green led.<\/p>\n\n\n\n

Like many furnace manufacturers, Bryant uses flashing LED lights to indicate error codes that can give you an idea of what’s wrong with your furnace when it’s not functioning properly. The short flashes indicate the first digit of the two-digit code, and the long flashes indicate the second digit. Here’s are some common error codes.<\/p>\n\n\n\n

\n\n\n\n

CODE:<\/strong> RED LED1 ON.<\/p>\n\n\n\n

RESULT:<\/strong> Furnace is operating in emergency heat.<\/p>\n\n\n\n

\n\n\n\n

CODE:<\/strong> RED LED2 ON.<\/p>\n\n\n\n

RESULT:<\/strong> The microprocessor has malfunctioned. To reset: Put setup switch “SW-1” in the “ON” position nad jumper thermostat terminals “R”, “W\/W1” and “Y\/Y2” simultaneously with the door switch pushed in and power to the unit “ON”. Disconnect jumper and place setup switch in the “OFF” position. If LED2 reappears, replace main control board.<\/p>\n\n\n\n

\n\n\n\n

CODE:<\/strong> YELLOW LED3 ON.<\/p>\n\n\n\n

RESULT:<\/strong> Furnace is operating in high heat.<\/p>\n\n\n\n

\n\n\n\n

CODE:<\/strong> GREEN LED4 ON.<\/p>\n\n\n\n

RESULT:<\/strong> Furnace is operating in low heat.<\/p>\n\n\n\n

\n\n\n\n

CODE:<\/strong> RED LED2 FLASHING.<\/p>\n\n\n\n

RESULT:<\/strong> Line voltage polarity is reversed.<\/p>\n\n\n\n

\n\n\n\n

CODE:<\/strong> 1-1.<\/p>\n\n\n\n

RESULT:<\/strong> NO FAULT IN RECENT HISTORY DISPLAY
FIX:<\/strong> Indicates no faults have occurred within the last five cycles. To read recent fault history, put setup switch “SW-1” in the “ON” position. To clear recent fault history, put setup switch “SW-1” in the “ON” position and jumper thermostat terminals “R”, “W\/W1” and “Y\/Y2” simultaneously until an “11” is flashed.<\/p>\n\n\n\n

\n\n\n\n

CODE:<\/strong> 1-2.<\/p>\n\n\n\n

RESULT:<\/strong>\u00a0BLOWER CALIBRATION LOCKOUT.
FIX:<\/strong>\u00a0Indicates RPM calculated for low heat was less than 250 RPM or greater than 1300 RPM on two successive attempts. Auto reset after three hours. Reset power and refer to fault #44 section.<\/p>\n\n\n\n

\n\n\n\n

CODE:<\/strong> 1-3.<\/p>\n\n\n\n

RESULT:<\/strong>\u00a0LIMIT SWITCH LOCKOUT.
FIX:<\/strong>\u00a0Indicates the occurrence of 10 successive limit trips during high heat or three successive limit trips during low heat. Auto reset after three hours. Check for *Improper or misaligned limit and\/or limit shield. *Improper high or low heat gas input adjustment. *Stuck high heat solenoid in gas valve.<\/p>\n\n\n\n

\n\n\n\n

CODE:<\/strong> 1-4.<\/p>\n\n\n\n

RESULT:<\/strong>\u00a0IGNITION LOCKOUT.
FIX:<\/strong>\u00a0Control will auto-reset after three hours.<\/p>\n\n\n\n

\n\n\n\n

CODE:<\/strong> 2-1.<\/p>\n\n\n\n

RESULT:<\/strong>\u00a0INVALID MODEL SELECTION.
FIX:<\/strong>\u00a0Indicates model plug is missing or incorrect. See wiring diagram for correct connector jumper location.<\/p>\n\n\n\n

\n\n\n\n

CODE:<\/strong> 2-2.<\/p>\n\n\n\n

RESULT:<\/strong>\u00a0SETUP ERROR.
FIX:<\/strong>\u00a0Indicates setup switch “SW-1” or “SW-6” is positioned improperly. The following combinations will cause the fault: *Thermostat call with “SW-1” “ON”, or Thermostat call with “SW-6” “ON”, or “SW-1” and “SW-6” both “ON” together.<\/p>\n\n\n\n

\n\n\n\n

CODE:<\/strong> 2-3.<\/p>\n\n\n\n

RESULT:<\/strong>\u00a0INVALID BLOWER AIRFLOW SELECTION.
FIX:<\/strong>\u00a0Indicates improper “A\/C” or “CF” switch setting. The 042 and 14 units can deliver 1-1\/2 to 3-1\/2 tons A\/C and 600 to 1400 CFM for continuous fan. The 060 and 20 unit can deliver 2 to 5 tons A\/C and 800 to 2000 CFM for continuous fan. If code is flashing, unit will default tp closest allowable airflow.<\/p>\n\n\n\n

\n\n\n\n

CODE:<\/strong> 2-4.<\/p>\n\n\n\n

RESULT:<\/strong>\u00a0SECONDARY VOLTAGE FUSE IS OPEN.
FIX:<\/strong>\u00a0Check for: – Short circuit in secondary voltage (24VAC) wiring.<\/p>\n\n\n\n

\n\n\n\n

CODE:<\/strong> 3-1.<\/p>\n\n\n\n

RESULT:<\/strong>\u00a0PRESSURE SWITCH DID NOT CLOSE OR REOPENED.
FIX:<\/strong>\u00a0If open longer than five minutes, inducer shuts off for 15 minutes before retry. Check for: – Excessive wind – Proper vent sizing — Defective inducer motor – Low inducer voltage (115VAC) – Defective pressure switch -Inadequate combustion air supply – Restricted vent – Disconnected or obstructed pressure tubing – Low inlet gas pressure (if LGPS used) If it opens during blower ondelay period, blower will come on for the selected blower off-delay.<\/p>\n\n\n\n

\n\n\n\n

CODE:<\/strong> 3-3.<\/p>\n\n\n\n

RESULT:<\/strong>\u00a0LIMIT CIRCUIT FAULT.
FIX:<\/strong>\u00a0Indicates a limit, or flame rollout is open. Blower will run for 4 minutes or until open switch remakes whichever is longer. If open longer than 3 minutes, code changes to lockout #13. If open less than 3 minutes status code #33 continues to flash until blower shuts of Flame rollout switch requires manual reset. Check for: – Restricted vent – Proper vent sizing – Loose blower wheel – Excessive wind – Dirty filter or restricted duct system. – Defective blower motor or capacitor. – Defective switch or connections. – Inadequate combustion air supply (Flame Roll-out Switch open).<\/p>\n\n\n\n

\n\n\n\n

CODE:<\/strong> 3-4.<\/p>\n\n\n\n

RESULT:<\/strong>\u00a0IGNITION PROVING FAILURE.
FIX:<\/strong>\u00a0Control will try three more times before lockout #14 occurs. If flame signal lost during blower on-delay period, blower will come on for the selected blower off-delay. Check for: – Control ground continuity – Flame sensor must not be grounded – Oxide buildup on flame sensor (clean with fine steel wool) – Proper flame sense microamps (.5 microamps D.C. min., 4.0 – 6.0 nominal). – Gas valve defective or gas valve turned off – Manual valve shut-off – Defective Hot Surface Ignitor – Low inlet gas pressure – Inadequate flame carryover or rough ignition – Green\/Yellow wire MUST be connected to furnace sheet metal.<\/p>\n\n\n\n

\n\n\n\n

CODE:<\/strong> 4-1.<\/p>\n\n\n\n

RESULT:<\/strong>\u00a0BLOWER OUTSIDE VALID SPEED RANGE.
FIX:<\/strong>\u00a0Indicates the blower is not operating at the calculated RPM. If this fault occurs in conjunction with fault #44 check wiring to motor otherwise refer to the trouble-shooting guide.<\/p>\n\n\n\n

\n\n\n\n

CODE:<\/strong> 4-2.<\/p>\n\n\n\n

RESULT:<\/strong>\u00a0INDUCER OUTSIDE VALID SPEED RANGE.
FIX:<\/strong>\u00a0Indicates the inducer is not operating at the calculated RPM. Or it has not started within 10 seconds after a call for heat. Check wiring to motor otherwise refer to the troubleshooting guide.<\/p>\n\n\n\n

\n\n\n\n

CODE:<\/strong> 4-3.<\/p>\n\n\n\n

RESULT:<\/strong>\u00a0PRESSURE SWITCH CALIBRATION FAULT.
FIX:<\/strong>\u00a0Indicates the low and high pressure switch “make” points during high heat purge are not within calibration range. Check for: -Plugged condensate drain Water in vent piping, possibly sagging pipe -Improper pressure switch wiring or pressure switch tubing connections -Failed or “out of calibration” pressure switches.<\/p>\n\n\n\n

\n\n\n\n

CODE:<\/strong> 4-4.<\/p>\n\n\n\n

RESULT:<\/strong>\u00a0BLOWER CALIBRATION FAULT.
FIX:<\/strong>\u00a0Indicates the calculated blower speed is below 250 or above 1300 RPM. Unit will default to low or high heat mode if possible. If this fault occurs in conjunection with fault #41, check wiring to motor otherwise refer to the trouble shooting guide. If this fault occurs by itself, check for undersized ductwork, or excessive static caused by a dirty filter, or closed registers.<\/p>\n\n\n\n

\n\n\n\n

CODE:<\/strong> 4-5.<\/p>\n\n\n\n

RESULT:<\/strong>\u00a0CONTROL CIRCUITRY LOCKOUT.
FIX:<\/strong>\u00a0Auto-reset after one hour lockout due to; – Gas valve relay stuck open – Flame sense circuit failure – Software check error Reset power to clear lockout. Replace control if status code repeats.<\/p>\n\n\n\n

<\/span>
\n
\n
\n
\n
\"\"<\/figure>\n<\/div>\n\n\n\n
\n

\u65e0\u7ba1\u9053\u8ff7\u4f60\u5206\u4f53\u5f0f\u7a7a\u8c03\u4e0e\u4e2d\u592e\u7a7a\u8c03\uff1a\u54ea\u79cd\u6700\u9002\u5408\u5bb6\u5ead\u4f7f\u7528\uff1f<\/mark><\/a><\/p>\n\n\n\n

Ameristar Furnace Error Codes<\/mark><\/a><\/p>\n\n\n\n

RunTru Furnaces Error Codes<\/mark><\/a><\/p>\n\n\n\n

Lennox Furnace Error Codes<\/mark><\/a><\/p>\n\n\n\n

Amana \u7089\u9519\u8bef\u4ee3\u7801<\/mark><\/a><\/p>\n<\/div>\n<\/div>\n<\/div><\/div>\n<\/div><\/div>\n\n\n\n

<\/p>\n\n\n\n

\"\"<\/span>
\n
\n
\n
\n
\"\"<\/span>
\n

\"\"<\/p>\n<\/div><\/div>\n\n\n\n

\u5fae\u4fe1<\/mark><\/strong><\/h2>\n<\/div>\n\n\n\n
\n
\"\"<\/span>
\n

\"\"<\/p>\n<\/div><\/div>\n\n\n\n

Whats<\/mark><\/h2>\n<\/div>\n\n\n\n
\n
\"\"<\/figure>\n<\/div>\n\n\n

Tel\uff1a<\/mark>347-987-6766<\/mark><\/a><\/strong><\/h2>\n\n\n\n

\u90ae\u7bb1\uff1ajckhvac212@gmail.com<\/strong> <\/mark><\/p>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n

JK HVAC \u6211\u4eec\u5b89\u88c5\u3001\u7ef4\u4fee\u548c\u4fdd\u517b\u6240\u6709\u54c1\u724c\u7684\u7a7a\u8c03\uff01\u5305\u62ec\u7a7a\u8c03\u6e05\u6d01\u3001\u70d8\u5e72\u673a\u901a\u98ce\u53e3\u6e05\u6d01\u3001\u6696\u6c14\u7089\u7ef4\u4fee\u3002<\/mark><\/strong><\/p>\n\n\n\n

\ud83d\udccd \u670d\u52a1\u7ebd\u7ea6\u5468\u8fb9\u5730\u533a\uff1a\u66fc\u54c8\u987f\u3001\u5e03\u9c81\u514b\u6797\u3001\u53f2\u5766\u987f\u5c9b\u3001\u7687\u540e\u533a\u2026\u2026\u5feb\u901f\u4e0a\u95e8\u4f30\u4ef7<\/mark><\/strong><\/p>\n<\/div><\/div>","protected":false},"excerpt":{"rendered":"

bryant furnace codes Each of the following status codes is a two digit number with the first digit determined by number of flashes of the yellow led and the second digit determined by number of flashes of the green led. Like many furnace manufacturers, Bryant uses flashing LED lights to indicate error codes that can […]<\/p>\n","protected":false},"author":1,"featured_media":85,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[7],"tags":[],"class_list":["post-942","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-error-codes"],"yoast_head":"\nbryant furnace codes - \u7ebd\u7ea6\u5408\u6210\u51b7\u6696\u5de5\u7a0b\u516c\u53f8<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"http:\/\/www.jckhvac.com\/zh\/bryant-furnace-codes\/\" \/>\n<meta property=\"og:locale\" content=\"zh_CN\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"bryant furnace codes\" \/>\n<meta property=\"og:description\" content=\"bryant furnace codes Each of the following status codes is a two digit number with the first digit determined by number of flashes of the yellow led and the second digit determined by number of flashes of the green led. Like many furnace manufacturers, Bryant uses flashing LED lights to indicate error codes that can […]\" \/>\n<meta property=\"og:url\" content=\"http:\/\/www.jckhvac.com\/zh\/bryant-furnace-codes\/\" \/>\n<meta property=\"og:site_name\" content=\"\u7ebd\u7ea6\u5408\u6210\u51b7\u6696\u5de5\u7a0b\u516c\u53f8\" \/>\n<meta property=\"article:published_time\" content=\"2025-05-10T19:32:47+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2025-05-28T05:51:00+00:00\" \/>\n<meta property=\"og:image\" content=\"http:\/\/www.jckhvac.com\/wp-content\/uploads\/2025\/04\/Bryant-Logo.png\" \/>\n\t<meta property=\"og:image:width\" content=\"157\" \/>\n\t<meta property=\"og:image:height\" content=\"78\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"\u80af\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"\u4f5c\u8005\" \/>\n\t<meta name=\"twitter:data1\" content=\"\u80af\" \/>\n\t<meta name=\"twitter:label2\" content=\"\u9884\u8ba1\u9605\u8bfb\u65f6\u95f4\" \/>\n\t<meta name=\"twitter:data2\" content=\"8 \u5206\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/#article\",\"isPartOf\":{\"@id\":\"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/\"},\"author\":{\"name\":\"\u80af\",\"@id\":\"http:\/\/www.jckhvac.com\/#\/schema\/person\/a40238e88a2bd3649b4736dcd71c6260\"},\"headline\":\"bryant furnace codes\",\"datePublished\":\"2025-05-10T19:32:47+00:00\",\"dateModified\":\"2025-05-28T05:51:00+00:00\",\"mainEntityOfPage\":{\"@id\":\"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/\"},\"wordCount\":1065,\"publisher\":{\"@id\":\"http:\/\/www.jckhvac.com\/#\/schema\/person\/a40238e88a2bd3649b4736dcd71c6260\"},\"image\":{\"@id\":\"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/#primaryimage\"},\"thumbnailUrl\":\"http:\/\/www.jckhvac.com\/wp-content\/uploads\/2025\/04\/Bryant-Logo.png\",\"articleSection\":[\"Error Codes\"],\"inLanguage\":\"zh-Hans\"},{\"@type\":\"WebPage\",\"@id\":\"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/\",\"url\":\"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/\",\"name\":\"bryant furnace codes - \u7ebd\u7ea6\u5408\u6210\u51b7\u6696\u5de5\u7a0b\u516c\u53f8\",\"isPartOf\":{\"@id\":\"http:\/\/www.jckhvac.com\/#website\"},\"primaryImageOfPage\":{\"@id\":\"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/#primaryimage\"},\"image\":{\"@id\":\"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/#primaryimage\"},\"thumbnailUrl\":\"http:\/\/www.jckhvac.com\/wp-content\/uploads\/2025\/04\/Bryant-Logo.png\",\"datePublished\":\"2025-05-10T19:32:47+00:00\",\"dateModified\":\"2025-05-28T05:51:00+00:00\",\"breadcrumb\":{\"@id\":\"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/#breadcrumb\"},\"inLanguage\":\"zh-Hans\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"zh-Hans\",\"@id\":\"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/#primaryimage\",\"url\":\"http:\/\/www.jckhvac.com\/wp-content\/uploads\/2025\/04\/Bryant-Logo.png\",\"contentUrl\":\"http:\/\/www.jckhvac.com\/wp-content\/uploads\/2025\/04\/Bryant-Logo.png\",\"width\":157,\"height\":78},{\"@type\":\"BreadcrumbList\",\"@id\":\"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"\u9996\u9875\",\"item\":\"http:\/\/www.jckhvac.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"bryant furnace codes\"}]},{\"@type\":\"WebSite\",\"@id\":\"http:\/\/www.jckhvac.com\/#website\",\"url\":\"http:\/\/www.jckhvac.com\/\",\"name\":\"\u7ebd\u7ea6\u5408\u6210\u51b7\u6696\u5de5\u7a0b\u516c\u53f8\",\"description\":\"New York Heating & Air Conditioning\",\"publisher\":{\"@id\":\"http:\/\/www.jckhvac.com\/#\/schema\/person\/a40238e88a2bd3649b4736dcd71c6260\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"http:\/\/www.jckhvac.com\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"zh-Hans\"},{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"http:\/\/www.jckhvac.com\/#\/schema\/person\/a40238e88a2bd3649b4736dcd71c6260\",\"name\":\"\u80af\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"zh-Hans\",\"@id\":\"http:\/\/www.jckhvac.com\/#\/schema\/person\/image\/\",\"url\":\"http:\/\/www.jckhvac.com\/wp-content\/uploads\/2025\/04\/unnamed.png\",\"contentUrl\":\"http:\/\/www.jckhvac.com\/wp-content\/uploads\/2025\/04\/unnamed.png\",\"width\":200,\"height\":200,\"caption\":\"\u80af\"},\"logo\":{\"@id\":\"http:\/\/www.jckhvac.com\/#\/schema\/person\/image\/\"},\"sameAs\":[\"http:\/\/www.jckhvac.com\/\"],\"url\":\"http:\/\/www.jckhvac.com\/zh\/author\/ken\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"bryant furnace codes - \u7ebd\u7ea6\u5408\u6210\u51b7\u6696\u5de5\u7a0b\u516c\u53f8","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"http:\/\/www.jckhvac.com\/zh\/bryant-furnace-codes\/","og_locale":"zh_CN","og_type":"article","og_title":"bryant furnace codes","og_description":"bryant furnace codes Each of the following status codes is a two digit number with the first digit determined by number of flashes of the yellow led and the second digit determined by number of flashes of the green led. Like many furnace manufacturers, Bryant uses flashing LED lights to indicate error codes that can […]","og_url":"http:\/\/www.jckhvac.com\/zh\/bryant-furnace-codes\/","og_site_name":"\u7ebd\u7ea6\u5408\u6210\u51b7\u6696\u5de5\u7a0b\u516c\u53f8","article_published_time":"2025-05-10T19:32:47+00:00","article_modified_time":"2025-05-28T05:51:00+00:00","og_image":[{"width":157,"height":78,"url":"http:\/\/www.jckhvac.com\/wp-content\/uploads\/2025\/04\/Bryant-Logo.png","type":"image\/png"}],"author":"\u80af","twitter_card":"summary_large_image","twitter_misc":{"\u4f5c\u8005":"\u80af","\u9884\u8ba1\u9605\u8bfb\u65f6\u95f4":"8 \u5206"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/#article","isPartOf":{"@id":"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/"},"author":{"name":"\u80af","@id":"http:\/\/www.jckhvac.com\/#\/schema\/person\/a40238e88a2bd3649b4736dcd71c6260"},"headline":"bryant furnace codes","datePublished":"2025-05-10T19:32:47+00:00","dateModified":"2025-05-28T05:51:00+00:00","mainEntityOfPage":{"@id":"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/"},"wordCount":1065,"publisher":{"@id":"http:\/\/www.jckhvac.com\/#\/schema\/person\/a40238e88a2bd3649b4736dcd71c6260"},"image":{"@id":"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/#primaryimage"},"thumbnailUrl":"http:\/\/www.jckhvac.com\/wp-content\/uploads\/2025\/04\/Bryant-Logo.png","articleSection":["Error Codes"],"inLanguage":"zh-Hans"},{"@type":"WebPage","@id":"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/","url":"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/","name":"bryant furnace codes - \u7ebd\u7ea6\u5408\u6210\u51b7\u6696\u5de5\u7a0b\u516c\u53f8","isPartOf":{"@id":"http:\/\/www.jckhvac.com\/#website"},"primaryImageOfPage":{"@id":"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/#primaryimage"},"image":{"@id":"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/#primaryimage"},"thumbnailUrl":"http:\/\/www.jckhvac.com\/wp-content\/uploads\/2025\/04\/Bryant-Logo.png","datePublished":"2025-05-10T19:32:47+00:00","dateModified":"2025-05-28T05:51:00+00:00","breadcrumb":{"@id":"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/#breadcrumb"},"inLanguage":"zh-Hans","potentialAction":[{"@type":"ReadAction","target":["http:\/\/www.jckhvac.com\/bryant-furnace-codes\/"]}]},{"@type":"ImageObject","inLanguage":"zh-Hans","@id":"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/#primaryimage","url":"http:\/\/www.jckhvac.com\/wp-content\/uploads\/2025\/04\/Bryant-Logo.png","contentUrl":"http:\/\/www.jckhvac.com\/wp-content\/uploads\/2025\/04\/Bryant-Logo.png","width":157,"height":78},{"@type":"BreadcrumbList","@id":"http:\/\/www.jckhvac.com\/bryant-furnace-codes\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"\u9996\u9875","item":"http:\/\/www.jckhvac.com\/"},{"@type":"ListItem","position":2,"name":"bryant furnace codes"}]},{"@type":"WebSite","@id":"http:\/\/www.jckhvac.com\/#website","url":"http:\/\/www.jckhvac.com\/","name":"\u7ebd\u7ea6\u5408\u6210\u51b7\u6696\u5de5\u7a0b\u516c\u53f8","description":"New York Heating & Air Conditioning","publisher":{"@id":"http:\/\/www.jckhvac.com\/#\/schema\/person\/a40238e88a2bd3649b4736dcd71c6260"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"http:\/\/www.jckhvac.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"zh-Hans"},{"@type":["Person","Organization"],"@id":"http:\/\/www.jckhvac.com\/#\/schema\/person\/a40238e88a2bd3649b4736dcd71c6260","name":"\u80af","image":{"@type":"ImageObject","inLanguage":"zh-Hans","@id":"http:\/\/www.jckhvac.com\/#\/schema\/person\/image\/","url":"http:\/\/www.jckhvac.com\/wp-content\/uploads\/2025\/04\/unnamed.png","contentUrl":"http:\/\/www.jckhvac.com\/wp-content\/uploads\/2025\/04\/unnamed.png","width":200,"height":200,"caption":"\u80af"},"logo":{"@id":"http:\/\/www.jckhvac.com\/#\/schema\/person\/image\/"},"sameAs":["http:\/\/www.jckhvac.com\/"],"url":"http:\/\/www.jckhvac.com\/zh\/author\/ken\/"}]}},"_links":{"self":[{"href":"http:\/\/www.jckhvac.com\/zh\/wp-json\/wp\/v2\/posts\/942","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.jckhvac.com\/zh\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.jckhvac.com\/zh\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.jckhvac.com\/zh\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.jckhvac.com\/zh\/wp-json\/wp\/v2\/comments?post=942"}],"version-history":[{"count":3,"href":"http:\/\/www.jckhvac.com\/zh\/wp-json\/wp\/v2\/posts\/942\/revisions"}],"predecessor-version":[{"id":1380,"href":"http:\/\/www.jckhvac.com\/zh\/wp-json\/wp\/v2\/posts\/942\/revisions\/1380"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.jckhvac.com\/zh\/wp-json\/wp\/v2\/media\/85"}],"wp:attachment":[{"href":"http:\/\/www.jckhvac.com\/zh\/wp-json\/wp\/v2\/media?parent=942"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.jckhvac.com\/zh\/wp-json\/wp\/v2\/categories?post=942"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.jckhvac.com\/zh\/wp-json\/wp\/v2\/tags?post=942"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}